Golf Rangefinder Monocular Telescope Golf Course Dedicated Digital Measuring Device

Instructions for Use
1) Press the power/adjustment button to start the device; it will directly enter the lawn mode.
2) When used for playing golf:
The height on the scale in yards (2.6 yards) is pre-entered.
(1) Align the bottom line of the screen with the horizontal line of the lawn.
(2) Press the power/adjustment button to move the scan line up to the top of the golf flag.
(3) The number will appear at the top of the screen, indicating the distance to the hole.
3) When used to measure the distance to a specific target:
Press the function button to enter general function mode; the screen will display three digits plus one decimal place.
If you want to check your distance to the target:
(1) Press the power/adjustment button to enter general function mode; the screen will display three digits plus one decimal place.
(2) Press the function button to move to the tens digit, then press the power/adjustment button to input the number, ranging from 0 to 9.
(3) Repeat the above steps to set each digit and the decimal place.
(4) Press the function button to finish the input process.
(5) Based on the height you entered, the screen will display the minimum distance you can measure.
(6) Align the bottom line of the screen with the lowest point of the target.
(7) Press the power/adjustment button to move the scan line up to the top of the target.
(8) The number will appear at the top of the screen, indicating the distance to the target. Please enter its height.